< previous next>
Optical Encoders
80 mm
Incremental, Solid Shaft, Manual Type.
Suitable for manual pulse input type such as NC or milling machinery. High reliability, terminal connection type.
Power supply; 5V DV, 12V DC, 24V DC.
Customer's logo available.
Applications:
Industrial tooling machinery.
| Output Waveform |
°90 Output phase difference, CW rotation
(CW rotation as seen from fit surface)
A leads B clockwise when viewing the encoder shaft end.
Click-stop position falls within hatched area.
| Technical Specifications |
| Electrical specifications | |
Output wave |
Square wave |
| Output signals | A,B, (line driver output A,A,B,B phase) |
| Current consumption | ≤100mA |
| response frequency | 0~20KHz |
| Output phase difference | 90°± 45° |
| Supply voltage | 5V DC, 12V DC |
| Signal level | VH ≥85% Vcc, VL ≤ 0.3V |
| Number of pulses | 100 (other number of pulse available on request) |
| Output circuit | Open collector NPN, Push pull, Voltage, Line driver |
| Mechanical Specifications | |
| Signal Position | 4 kind |
| Speed without sealing | 500rmp |
| Starting torque without sealing | ≤1.0x10-2Nm (+25°C) |
| Shock resistance | 980m/s2, 6ms, 2 hours each on XYZ |
| Vibration proof | 50m/s2, 10~200Hz, 2 hours each on XYZ |
| Working life | MTBF ≥10000h (+25°C, 2000rpm) |
| Weight | Appr. 275g |
| Environmental Specifications | |
| Working humidity | 30~85% (no condensation) |
| Storage temperature | -30°C~85°C |
| Working temperature | -10°C~70°C |
| Protection class | IP54 |
| Terminal Assignment |
| Code | 1 | 2 | 3 | 4 | 5 | 6 |
| Line driver output | +5V | 0V | SIG A | SIG A | SIG B | SIG B |
| Other output circuit | +5V | 0V | SIG A | SIG B | / | / |
| Ordering Code |
| ISM8060 | 002 | 100 | B | 24 | C |
| Series | Sequence Number | Number of Pulses | Output Signals | Supply Voltage | Output Circuit |
| Dimensions |
Motors described above are typical and can be customized upon request.
Ready to get started? Click here to request a quote.
